NEW!  Iridium GMDSS and LT-3100S Terminal

Iridium_GMDSS_and_LT-3100S.JPG

 

 

 

 

 

 

 

 

 

 

 

The LT-3100S GMDSS system is designed for all IMO vessels and will be an alternative to the Inmarsat C. The LT-3100S GMDSS system meets all standards and certification requirements needed for worldwide maritime satellite communications equipment (MED, Wheelmark).

 

Features

  • Operating on brand new Iridium NEXT constellation  LarsThrane
  • Global coverage including A4 sea region (I-C doesn’t support A4)
  • Higher capability terminal built by Lars Thrane
  • Competitively priced voice services
  • Perfect GMDSS companion to primary data comms on-board

 

Performance

The LT-3100S GMDSS system has voice and data capabilities with 100% global coverage and consists of a control unit, handset, and antenna unit. A single cable solution connects the control unit with the antenna unit. Using a standard coaxial cable, up to 500 meters of separation between the units can be obtained, giving freedom to mount the antenna in the best possible location, with free line of sight to the satellites.

The LT-3100S GMDSS system is not only designed for GMDSS services. It also offers SSAS and LRIT functionalities. It can be used as the primary satellite communication product on vessels, covering the basic communication needs in terms of connectivity between the ship and shore. The LT-3100S GMDSS system also provides voice, SMS, data, vessel tracking, and other Iridium services with competitive airtime rates, making it the perfect satellite communication product on board any vessel.

The LT-3100S GMDSS System is designed and built for the demanding and rough environment at sea and with an operational temperature range from -40⁰C to +55⁰C (-40⁰F to +131⁰F).

Installation

The LT-3100S GMDSS system is very easy to install. Everything is included in the box to get started with the installation and operating the LT-3100S GMDSS system. The control unit can be installed using either a bracket mount or flush mount. The antenna unit can be mounted using either a pole mount (1.5″ tube) or angle bracket mount (1″ to 2.5″ tube). The control unit has a large 4.3″ TFT display, from where the system can be operated with overview and ease. The built-in webserver can be used for service and maintenance.

Download Brochure